It may happen that your bike is looking a little worn over time, but it still works perfectly! Getting a glittering look for your bike is always a laudable idea. It may seem difficult to paint a bike without taking it apart. But it will appear to be a seamless and easiest process if you follow some techniques while painting a bike without taking it apart.
How to Paint a Bike Without Taking It Apart
Don’t be confused, it’s really an easy task to paint a bike without taking it apart. Just follow the necessary steps down below.
Step-1: Get rid of rust without taking the bike apart
Sometimes, there remain several rusty spots on the bike frame. Then remove the coats first. There are so many ways to remove rust from the bike but using aluminum foil and coke are preferable. You just need to soak a ball of aluminum in the coke and then rub off the rust. It is a faster and cheaper process.
Step-2: Sand the bike frame
While painting the bike, it’s necessary to sand the bike. It gives a rough feel on the outer side of the bike which is essential for the painting to stick hard. To do this use the high grit sandpaper first, then move to the low grit sandpaper.
Step-3: Clean the bike frame
After sanding the frame completely, you need to give your bike a fresh look before spraying. Soak a dry cloth to water and use it to remove dust.
In case the dust is too obstinate, consider using a WD-40 degreaser. One effective WD-40 degreaser that can be used is WD-40 300281 Special Industrial Strength Degreaser. See how magically it frees your bike out of dust.
Step-4: Covers the area you aren’t painting
In this step, you have to cover all the places that you don’t intend to paint. To do this you can use various types of tape. You may use masking tape, duct tape, or aluminum foil to cover up the places you don’t want to paint.
Among the many other covering tapes, Amazon Basics Painter’s Tape is the best one. This tape is UV resistant and can stay up to 2 weeks without any damage to the bike. If you are short on budget, you can wrap up the frame with a news newspaper or trash bag.
Step-5: Put the bike upside down
Put your bike in a bike mount before painting it. It will appear to be an easy step if you already have the amount. No worries! If you don’t have any mount, you can simply use some paper on the ground and put the bike upside down.
You may also think of an alternative way. Use a rope and hang the bike in a tree to start spraying.
Step-6: Start spraying
Now this is the time to start spraying. So, follow some tips. Finish the first layer of painting and let the paint be dried up at least 30 minutes before the second layer. Always put the spray can in a constant motion to avoid the unpleasant drip marks.
Then use the second layer the same way as the first until you cover the old coat. Again allow the second layer to dry for 30 minutes and apply the last layer of painting. Be careful and share the concentration equally because this is the last layer. Apply at least three coats for the best result.
Step-7: Dry the paint
Now you have finished painting, and your bike is ready to glow. But don’t be so impatient, you’re not done yet. You have to let your paint dry off. Remember that every great thing takes time and you have to ensure it that you have such amount of patience.
Step-8: Remove the bike covers
Lastly, remove the newspaper, duck tape or foil that you have used for covering the area which you want to protect from paint.
Can You Paint Your Bike Without Standing It?
Painting a bike without sanding never can be an ideal idea. Without sanding, the painting won’t stick hard on the frame and you have to do the same thing again and again. So, always remove rust before painting a bike. Sanding refers to getting rid of old paint and removing rust. It actually ensures smooth finishing on the bike frame.
Can You Paint Your Bike with Acrylic Paint?
Undoubtedly, you can use acrylic paint on a bike. Acrylic paints are best for bikes since the acrylics work well on steel and aluminum. Acrylic paint can’t easily damage or corrode either on steel or aluminum.
However, you must have to know the way of applying paint properly. Otherwise, it will not adhere to the bike precisely and will easily perish in the future. Besides, before using the acrylic, confirm that the frame of the bike is completely rust-free and clean.
How Much May do It Cost?
There is no fixed cost of bike painting whether you do it yourself or through a service-man. If you do it on your own, the whole process might cost you $40-$150, depending on the ingredients you use. But if you have some ingredients at home, it will obviously cost less.
However, when you don’t want to take any hassles, you can hand your bike to a professional bike service man. Certainly, this time cost will increase as he charges you for his service. Depending on demand and painter package, you may have to spend $200-$450.
Follow the tips given above to paint your bike without taking it apart. Though it seems like a difficult task, it will turn out to be a simple one when you start to do it. It will give your bike a fresh and glossy look. You will be delighted with yourself and the bike as well. So, try it out following the tips and see the result.