When we come home from a long day, seeing a beautiful and fine exterior wall makes the day, it takes all the tiredness away. But often we procrastinate painting the exterior wall because it is a hassle and takes a lot of time.
Well, this is true to some extent but if you are taking too much time and not having the expected result then you have been doing it in the wrong way. Some might think of hiring some professionals to do this, because why take such hassle! This is definitely an option but also very costly and most of the time people cannot afford it.
However with the right way and proper guidelines you can paint the exterior walls for painting. For getting this the most important thing is to prepare the wall for the paint.
Most of the time people do not follow these steps and do not prepare the walls. As a result the paint does not set on the wall propeller and gives a disappointing result.
Here we will give the guidelines on “how to prepare exterior walls for painting” so that next time you are painting the exterior wall you do not get disappointed and get a smooth finish.
How to Prepare Exterior Walls for Painting
Check the Weather
It’s necessary to keep an eye on the weather. Areas of the house that receive little or no direct sunlight will take longer to set up. Sections baked in direct sunlight will develop a hard surface and become dry to the touch before they are fully cured.
Examine a map of cold weather locations to see if vapor barriers are required. Rain can halt an outside painting project, but there are other factors to consider as well. So never paint during the rainy season. Many paints have a limited temperature range of operation.
If they are too hot or too cold, they will heal slowly or not at all. Check the labels to make sure you won’t have any problems. Another issue that might delay down healing periods is humidity.
If you’re painting in very humid conditions, double-check the last layer before applying another. Similarly, while planning the route of your labor, consider the path of the sun.
Clean the wall
When you clean the exterior wall before painting, you give the finest surface preparation for receiving paint before any subsequent preparations. Making certain that no foreign material is trapped beneath fresh paint. So, before applying paint to the exterior of your property, use a high pressure wash technique to clean it.
This is one of several critical processes in painting the exteriors, beginning with the soffits and gutters and continuing down the walls. If necessary, have a good time cleaning gutters. Many pressure washers allow you to simply apply multiple cleaning solutions to your exterior at the same time.
Sometimes cleaning the wall is not enough. Just cleaning does not remove old dirt or dust, so pressure wash is necessary. Remove dirt and dust from the wall with a pressure washer. This will guarantee optimum coverage.
Move from top to bottom of the home in a steady, controlled motion. Depending on how much surface has to be cleaned, a high-pressure wash approach is by far the most effective before painting outside walls. Not only are many hours saved cleaning, but surfaces are properly cleaned.
Taking a pressure washer to your home is similar to taking your car to a local manual car wash. Regular city water pressure from a garden hose will not be enough. Using a power washer to remove dirt, grime, dust, and film before applying paint works best since it does not seal anything below.
Remove the Excess Paint and Fix Damaged Surface
When the outside is dry, go around the perimeter of the home, noting any loose or chipped paint. Then use a paint scraper or a medium grit sanding block to remove loose and excess paint. Using a spackle knife, apply epoxy filler to cracks or holes. After it has dried, softly sand it with a medium-grit sanding block.
Priming a porous wall, such as unstained or untreated wood, is always a good idea. When a surface absorbs water, moisture, oil, smells, or stains, it is porous. Newly placed drywall is also very permeable, but in two ways: the naked facing paper and the dried joint compound covering the seams.
If you don’t prime beforehand, these porous materials will essentially soak your paint straight into the wood or drywall. If the paint is peeling away from a home’s exterior, it’s definitely better to prime the entire house first. But if you want to skip this step then you can do it. This is not a mandatory step.
By now you must have known that painting the exterior wall and getting a good result is not hard. As now you know how to prepare exterior walls for painting, there are no chances of any mistakes. Following these steps to prepare the wall will give a satisfactory result. Let us know your experience and share this article with your friends and family.