The handle of a tool is the place that we touch and hold the most. No matter how well made the tool handle is, it is unprotected and exposed to dirt and other elements. After using a few months the handle starts to become withered.
To remove the dullness from the handle you need to polish it with the best finish for wood tool handles. Those make the handle moist and enhance the natural appearance.
Here we are providing a list of 5 finishes that will last for a long time, are easier to apply, and bring the wooded handle to life.
Best Finish for Wood Tool Handles Reviews
1. Minwax Finish for Wood Tool Handles | Dry Formula
Most of the time coatings take a long time to dry, waiting for it is very tiring. But with the Minwax, the best finish for tool handles, you can reduce this problem because this quick-dry formula takes only 2 hours.
If your wood is birch, maple, or ash, or any other light-colored wood, this is the finish for you. It will leave a crystal clear satin finish on the wood surfaces, making them seem polished and clean.
This protective coating’s crystal-clear finish is perfect for use over all sorts of woods, including oak, walnut, cedar, and birch, as well as over Minwax Water-Based Stains. It also comes in a range of sheens.
Most Liking Features
It’s simple to use because it can be simply removed with warm water and a towel. Furthermore, with a moderate and low odor, you will not have any nausea while application.
Probable Drawbacks
The bottle is small for a big project
Key Features
- Has a quick-dry formula
- Provide a protective coating
- Easy soap and water cleaning
- Bring a natural color
2. General Finish for Wood Tool Handles | Good Grain
The main concern about any finishes is how long is it going to last. The wood finish by general finishes hardens and becomes more durable over time. You may also use this product to freshen and rejuvenate the present finish.
I have to state that the General Finishes stain merits all five stars. It was not only simple to apply, but it also looked excellent. Depending on the aesthetic you desire, you may apply it solidly or make it more transparent by wiping it more and applying fewer coats.
You’ll be enamored with the product’s warm and deep gloss on your wood. This improves the natural beauty and appearance of walnut while giving the impression that it was done by hand.
Most Liking Features
The solution flows out smoothly because of the heavy-bodied gel composition, avoiding unequal penetration for constant color control.
Probable Drawbacks
This comes in a big jar, so not suitable for small projects.
Key Features
- Simple to use
- Has a very good grain
- Good for changing the look
- Very easy to clean
3. Minwax Finish for Wood Tool Handles | Oil Based
It is better to purchase from a renowned brand while planning to give your tools a new look. In our third product, we bring the wood finish from Minwax which has been serving the customers since 1904.
As a painter of wood items and wood signage, I use it most of the time. I like how the wood grains stand out when these dyes are applied. I frequently use red mahogany and adore the color of the wood.
With Minwax, staining wood has never been easier.
The unique formula allows it to completely permeate wood pores in 5 minutes and dry in 2 hours, making all of your wood tasks quick and easy.
Most Liking Features
You receive a wood finish that dries quickly and protects all of your hardwood surfaces from mildew and decay. It penetrates deeply into the wood to guarantee strength and endurance.
Probable Drawbacks
This has a high price compared to other products
Key Features
- Oil-based wood stain
- Deeply penetrate wood pores within 5 minutes
- Has multiple color options
- Perfect for wooden tool handle
4. Varathane Finish for Wood Tool Handles | Shiny Finish
Do you have small children that frequently scrape and mark your wooden tools? Don’t worry, because we have a solution. The best Finish for Wood Tool Handles by Varathane has been specifically designed to handle these issues!
It is really simple to use, and the small can was enough for three coats on the table and three coats on a little end table, with approximately a third of a can leftover. It dried completely clear, although it was milky when applied.
Varathane Ultimate Water Based Polyurethane is a transparent protective coating for interior wood surfaces. Fast drying and simple soap and water cleanup save time and effort. That is why this is in the list of the Best Finish for Wood Tool Handles.
Most Liking Features
This diamond wood finish will protect your indoor wood projects such as cabinets, doors, and windows.
Probable Drawbacks
The jar is tiny. It is only 236 ml jar
Key Features
- The formula is very durable
- Provide a shiny finish
- Easy to apply on handles
- Has a fast drying formula
5. Hope’s Finish for Wood Tool Handles | Alcohol Resistance
Exotic tools require an exotic wood treatment to protect them while allowing their distinctive beauty to come through. That’s Why we bring Hope’s Finish for Wood Tool Handles.
Tung oil is the main component in this product. It is the only unusual drying oil that seasoned woodworkers swear by. It’s an excellent finish for antiques and furniture built from exquisite wood.
The product produces a homogeneous finish that resembles good, hand-rubbed work.
Aside from the obvious beauty, the finish lasts a long time, eliminating the need for frequent maintenance.
Most Liking Features
Hope’s Finish lies on the surface of the wood. The oil penetrates deep into the fibers, cures, and becomes a part of the wood.
Probable Drawbacks
The oil sticks a bit, to wear a mask during work
Key Features
- Fast drying and exotic oil
- High resistance to water and alcohol
- Suitable for all type of wood
- Can be applied on unfinished wood
FAQs – Frequently Asked Questions & Answers
1. What is the difference between oil-based and water-based?
As time passes, oil-based finishes begin to discolor. Water-based coatings darken over time, although not as much as oil-based finishes. Check out the most essential Review for Exterior Paint for Mobile Homes.
2. Is the finish durable?
Yes, the best finish for tool handles is durable. Make sure you also check our guide for Aircraft Paint Remover.
3. Does the final look depend on the wood quality?
The texture of many types of wood varies. As a result, they respond differently to the wood finish you’re using.
4. How to use oil-based finish on tool handle?
At first clean the tool handle and simply apply the finish using a brush and then let it dry. After it completely dries, you can go for another coat.
5. Can I use coconut oil for wood tool handles?
This is an option but not the best option. Because coconut oil is not enough to bring the shine back to the wood. And sometimes it makes the oil dark.
Final Words
The tools are being used regularly and most of the time we do not take care of them, throw those into the drawer and close it. That’s why after some time the tool handle loses its shine and becomes dull.
At that time for an impactful solution, using the best finish for wood tool handles is a must. Using it is very easy, just picking the right one is the challenge. Hopefully, this article will help to overcome the issue.